search

cryptk / haomnilogic-local

A Home Assistant integration for Hayward OmniLogic/OmniHub pool controllers using the local UDP api
Apache License 2.0
19 stars 4 forks source link

VSP not able to change speed #112

Closed phantomdez closed 4 months ago

phantomdez commented 4 months ago

Just installed and it detected my equipment ok. I am able to turn the pump on and off without issue. When I press the High, med, Low speed settings Home Assistant shows the speed change but on the next polling it reverts to whatever the speed setting is currently set to. I also attempted to shut the pump off and then set the speed to a custom value. The pump starts up and then the polling picks up the previous speed setting.

I did test Temperature and my Chlorinator and the settings and they are able to adjust the value of temperature or the ammount of Chlorination happening. It just appears to be the pump speed adjustment.

I have a VSP model: Tristar VS 900 in case that makes a difference. If you need logs or other information I am happy to contribute just let me know where I can get the details you need.

phantomdez commented 4 months ago

Ok so it seems that this isn't an issue. It suddenly started working. The only reason I can think of as to why it didn't function earlier is that I had the web portal open trying to view the updates but it was overriding the pump speed by leaving it open. The Android app doesn't seem to cause this issue, only the omnilogic portal seems to do this.

phantomdez commented 4 months ago

See above