-
From the normal interface, with Netmon enabled, sometimes if I hit the asterisk key to check the detailed info of the last caller, the display gets stuck on that page.
-
It would be great to open/import an existing codeplug, which was created by the manufacturer CPS. This would help to switch to this software.
-
The GPS Systems dialog contains an empty entry after the last element...
![Screenshot from 2020-07-26 17-23-35](https://user-images.githubusercontent.com/152904/88492403-94eff380-cf78-11ea-918e-290…
-
Hi. When pushing a codeplug with analog channels and DCS code, the DCS code is'nt pushed on the radio.
If i configure the DCS directly on the radio, qdmr is able to read them. Pushing the same codepl…
-
If names are the same, then re-importing contacts will not corrupt channels and RX groups in your codeplug. If they differ, you will have to go back into each corrupted channel or RX group and fix it.…
ajorg updated
8 years ago
-
Set this as default Channel Names Not Unique as this causes some problems when loading and saving code plugs with channel names being the same name.
-
M0IVQ has been kind enough to send us the remaining bitfields for the codeplug memories. Close this issue when they have been imported into our CHIRP driver, and perhaps also into the patched firmwar…
-
I have a bright new MD-1702 with the Firmware L05.00.05.
Using the tool I could not do anything except reading the version id or read the FW
After trying to get the codeplug inside the radio, th…
-
Greetings.
Original Baofeng software allows to define single TS for talking with repeater.
dmrconfig on other hand, don't set specified bit in codeplug until i manually change following line in rd5r…
-
Hi All,
After perforing a mostly successful upgrade of the 868 to 878, I have noticed the chan set menu missing on the radio and also, activating the key for digi monitor doesn't work.
All steps…