-
For servos on the Aux outputs, it would be great if DroneKit had functionality for controlling Aux servos similar to how RC Overrides are handled. The only way, as far as I know, to control servos/se…
-
Create a schematic with the following:
- [x] Servos powered directly from Vbat
- [ ] Logic level converter so PPM signal to control servos from MCU is at 5V
- [ ] MOSFET switch to kill the servos from…
-
Hi Cort! It's Eric from Ohio, USA. I would say I hope you're having a good summer if you weren't almost directly on the equator.
I am trying out some new code for next year's robotics class, and I…
-
how does the bus work?
similar to the can / odrive ?
do we need to route a bidirectional cable to the servos or can we split the bus in the main control area?
-
The Makecode IDE only permits controlling servos on pins `A1` and `A2`.
Adafruit's [pinout diagram](https://learn.adafruit.com/assets/47156) shows that pins `A2`,`A3`,`A6`,`A7` support PWM, *(Admit…
-
Hi,
I'd like to control one servos with your python module.
I have a MacBook and I'm trying to use python with arduino Yun.
I inizialize the board with
> board = Arduino("9600",port = "/dev/tty.usbm…
-
Goals:
- [ ] Figure out how to use the servo programmer and use its various functions to further pursue our other goals
- [ ] Program the servo
- [ ] Code the intake to spin forwards and backward…
-
hi,
In your video controlling 2 servos, you say it might be possible to use the 5V to power the driving board and servos, instead of using the external 2 AA batteries.
Have you tried that?
https:…
-
## What's the motivation for this feature?
Both of these devices are ones i've been avoiding for a while for various reasons, but we need to support them at some point.
## Describe the solution yo…
-
I'm using a Raspberry Pi 4 to control the PCA9685. I have generic MG996R-style servos connected (2 different brands). When I set the servo.angle = None, the servos just hold their current position w…