-
### The problem
Hello,
i have air cooling teknopoint with tado climatisation v3, when i try to set the mode fan only (hvac) nothing happens and I return to the previous mode.
The mode dry, cool…
-
-
Easy to fix issue:
When heatpump is in cooling mode used together with NavigatorPro with Zonemodules, the activator monitor do not work.
I see in the "information - Zonemodules" the Status for eac…
-
In some less common situations, it is possible for there to be moderate discrepancies between the total heating (or cooling) load and the sum of its components loads after A) [changing the component l…
-
My setup:
I'm using IO Board.
Connected Camera and Ethernet cable.
Boot switch pin not connected.
I realised that after some time of idle board reset and doesn't boot until reset by button or…
-
In this case, we didn't provide more than one of a single object type (i.e cooling system); however, we did include both a cooling system and a heat pump. I think this must be happening at the `applie…
-
The cooling curves currently stop at 300eV, which is not great as upstream temperatures can reach that for some devices:
![image](https://github.com/cydcowley/DLS-model/assets/62797494/6c609f7c-06e9-…
-
Bear with me here, I haven't really contributed to open source stuff before so I'm not sure what the best format is :)
Added this plugin for the first time today, immediately worked except for this…
TJ178 updated
11 hours ago
-
Does weather factor need to be considered in the calculation of radiation cooling power, such as cloud layer, atmospheric water vapor content, and so on?
-
The box has electrical and water lines to connect it to the boat.
All cables and lines should connect to the camera box via connectors. The camera box should be able to disconnect from all lines. T…