-
I don't know what reason I confirm and delete buttons are not sensitive,Use the resistor has direction requirement?
-
I am posting this to describe my experience in trying to get 5 RFID devices (MFRC522) to work at the same time using 1 Arduino.
This is also relevant to these posts:
https://github.com/miguelbal…
-
is it possible to add mqtt publish to nodemcu with wifimanager +http server ?
-
I was measured 4.81mbps for the following code:
void shiftOutFast(byte data)
{
byte i = 8;
do{
GPIO_REG_WRITE(GPIO_OUT_W1TC_ADDRESS, 1
-
I'm using a ModeMCU - ESP8266 board
with this NFC reader: [https://it.aliexpress.com/item/33014782756.html?spm=a2g0s.9042311.0.0.6d6e4c4dy4vnIS](https://it.aliexpress.com/item/33014782756.html?spm=a2…
-
Hello,
It is possible to modify/recompile version 1.x to run on an ESP32?
https://maker.pro/esp8266/tutorial/how-to-upgrade-from-esp8266-to-esp32
-
An issue to define problem/specifications/implementation plan/etc.
-
I've tried with 3 different esp8266 modules and 3 different pn532 boards and can't get it working.
I've triple checked the wiring, soldering, etc...
Home assistant running locally and not exposed …
-
Hello,
I have notice sometimes on some esp8266 devices, that I'm not unable to connect to Protal AP so I can configure wifi settings for esp to connect to router. But using that same esp on anothe…
-
Hi, looking for a way to implement gatw access using 868mhz fobs, will this system work with those if the fob receiver uses weigand?
Thanks, Tim