-
## Version of the moonraker integration
1.2.0
## Describe your setup
Creality K1 Printer with Klipper, Moonraker, Fluidd, Mainsail
## Describe the bug
I have 4 numbers in my integra…
-
### What version of Spook are you using?
latest
### What version of Home Assistant are you using?
latest
### The problem
I've spotted a translation error in the russian localization file. 'Fans'…
-
I can't seem to find a way to stop the fans. The obvious setDutyCycle(0) doesn't work.
In forums I've read that you can turn it off by switching pin mode to OUTPUT and digitalWrite(pin, LOW).
But …
ghost updated
1 month ago
-
Is it too difficult to configure fan cards in Dynalite as as a 4 preset fan template in the way a room is?1 Area, 4 presets, High/Medium/Low/Off
-
Fans don't Spin according to the applied settings.
I have an Alienware M18 R1 and it has a low fan speed cap at 1300RPM that starts the CPU1 and GPU3 fans at around 55C the Problem is the 1300RPM ma…
-
When scraping Fansly I am only able to download a fraction of a performers posts that I have access to. it doesn't seem tied to a date because when I scrape different performers the number of posts I …
-
# Model: `phn16-71`
## Count of keyboard RGB zones: 4
### Count of Cpu Fans: 1
### Count of Gpu Fans: 1
### RGB keyboard works? Yes
### Turbo button turn on fans? Yes
### Turbo button tu…
-
# Model: Nitro AN16-41
## Count of keyboard RGB zones: 4
### Count of Cpu Fans: 1
### Count of Gpu Fans: 1
### RGB keyboard works? Yes
### Turbo button turn on fans? No
### Turbo butto…
-
On my 7920 (workstation tower), there are at least 10 fans. I added this to `fan_speed` in i8kctl.c:
for (int x = 0; x < 20; x++) printf("%d: %d\n", x, i8k_get_fan_speed(x));
And with that …
-
What should I do?