-
I have the Adafruit M0 LoRa feather, and I am very new to LoRa and LoRaWAN.
I've cloned the latest master branch of this repo and made a few changes:
1. In 'config.h' I've commented the line for E…
-
Hi, i have problem with connection between Raspberry and Arduino. When i set configuration raw on true
("gateway_conf": {.. "raw": true,) i get messege from Arduino, but Rasp does not sent ACK to A…
-
**Describe your question or issue**
I am using Lora Discovery board L072CZ. Using the example helium-otaa. I used with platformio.
I Gave correct EUIs and AppKey, when running the program it seem…
-
Hello @CongducPham sir,
I'm working on the Ping_pong code :
`
#include
// Include the SX1272
#include "SX1272.h"
// IMPORTANT
/////////////////////////////////////////////////////////////…
-
Hello Everyone,
Great library, and it has served me well over the past couple years. Thank you for your hard work.
I recently encountered an issue with my Adafruit Feather M0-based board (SAMD2…
-
In the past I have been struggling to make LMiC work together with my microcontroller going into deep sleep mode. Currently I do a call to `os_queryTimeCriticalJobs(ms2osticks(5000))` after which I wi…
-
Im using arduino dragino shield v1.4. { no dio pins used}.
Its showing unrecognized trans-receiver. Where as the LoRa GPS hat is working fine on the RPi.
I'm using arduino uno with dragino Shield v…
-
I am using LMIC on nRF52 platform. I have successfully ported hal.cpp and now I want to switch to using interrupts. Mainly I want to sleep while waiting for RX as that's the majority of time the libra…
-
### Describe the problem
I have the following setup: https://github.com/arduino/arduino-ide/pull/1132#pullrequestreview-1031068976
When I start the application I see the following errors logged:…
-
One of the main difficulty in having other groups facilitate this workshop is hardware requirements:
* Module 1,2,3,5 require: Raspberry Pi 3B or 3B+ with a [Toplinkst dual-band adapter](https://gi…