-
For pre-gate sensors that are remote from the MMU, such as at the buffer, it would be useful to have a user set delay variable for the automatic preload function. This gives the user time to push fil…
-
### Describe the feature or hardware support you'd like
Does the current filament sensor macro(s) and Klippain in general support the Orbiter Filament Sensor pre-built macro configuration provided …
-
In Marlin Configuration_advanced it says
> * 34 RAMPS_14 : Analog input 5 on the AUX2 connector
> * 81 PRINTRBOARD : Analog input 2 on the Exp1 connector (version B,C,D,E)
> * 301 RAMBO …
-
This is just to track and not forget for the next version to add this: https://github.com/bigtreetech/smart-filament-detection-module
```
[filament_switch_sensor switch_sensor]
switch_pin: gpio…
-
That's one big problem with SFS2.0 filament sensor. Pain to use.
Current design of output holes in filament path is like this:
![btt-sfs2 0-filament-out-path](https://github.com/bigtreetech/smar…
arekm updated
1 month ago
-
Please, before you create a new bug report, please make sure you searched in open and closed issues and couldn't find anything that matches.
**Printer type** -
**MK4**
**Printer firmware v…
-
### Bug Description
Marlin 2.0 filament runout sensor error
filament is working and status is correct when using pronterface. Also i measured voltage with and without filament and values are …
-
There is a pretty common case where the Annex tension belay sensor never triggers when the printer is restarted until the sensor is triggered manually (or through luck) for the first time.
This is …
-
### Printer model
Mk4
### Firmware version
6.0.3
### Upgrades and modifications
Prusa Original Enclosure
### Printing from...
Prusa Connect
### Describe the bug
During a pri…
-
I don't know why, but sometimes the unload fails and I'm sure the synced unload not works if it fails.
It tries to unload to the buffer but the filament is still inside the extruder (toolhead sensor …