-
### GalaxySlicer Version
1.0.0beta
### OS version
Windows 10
### OS architecture
x64
### Additional system information
_No response_
### Printer
Craftbot Flow IDEX
### Ho…
-
utilize `grbl_sim`
provide a voxel/sparse octree representation of the stock
rig up grbl_sim with a websocket and pipe the generated gcode into it. Data coming from grbl_sim should be positional da…
-
When printing either via LAN or cloud, it seems thumbnails don't show up on my machine (Ender 3 V3) or my cloud account. Sliced files uploaded to cloud.
![photo_2024-05-07_10-11-11](https://github.c…
-
### Version
; generated by PrusaSlicer 2.2.0+win64 on 2020-08-28 at 06:19:36 UTC
### Operating system type + version
Windows 10 v2004
### 3D printer brand / version + firmware version (if know…
-
### Version
2.x, current master
### Operating system type + version
Linux testing
### 3D printer brand / version + firmware version (if known)
Prusa MM
### Behavior
* Rename the attached …
-
Firstly, thanks for this great website and extremely useful calibration tools.
I know this type of issue has been brought up already (e.g. [#150](https://github.com/teachingtechYT/teachingtechYT.gi…
-
As noted in https://github.com/gojimmypi/GcodeLanguageExtension/issues/2#issuecomment-523359226 there is no G-Code syntax highlighting in VS2015, although the same code appears to work just fine in VS…
-
Hello everyone, i need to attach the grbl code to an investigation paper I am doing for the university, I know that is a complicated code, but where can I locate the main file or what could I do to ge…
-
Originally, FlashPrint shows file printing progress in a corner, based on the slicer's calculations for printing. This is possible because of the specifications for the GX file, also known as XGCODE f…
-
**Describe the solution you'd like**
It would be very useful to be able to modify the start and end g-code that Makelangelo software generates.
While we can **add** user g-code to the plotter sett…