-
## Expected Behavior
Below is a good start - needs further update in the future.
https://github.com/mabrains/globalfoundries-pdk-libs-gf180mcu_fd_pr/blob/main/models/ngspice/testing/README.md
#…
-
In my `caravel_user_project`-derived project I cannot run `make user_proj_example` or even my own design through `make bfg_mux_test`. Both fail with a 'permission denied' error accessing a path in the…
-
## Expected Behavior
https://github.com/google/globalfoundries-pdk-libs-gf180mcu_fd_pr/tree/main/cells/klayout/pymacros README should document how to generate gds using klayout and how to regenerat…
-
In order to stabilize and streamline integration with jupyter notebooks, it would be nice to provide a [constructor](https://github.com/conda/constructor) installer for: OpenLane #244 and its dependen…
-
## Expected Behavior
Installation steps for gf180mcu-pdk
## Actual Behavior
Sorry if still on the development. I didn't find any document for installation for this PDK and how to use.
## Steps…
-
CI on this repository should verify that the standard cells pass the GF180MCU DRC rules.
Example GitHub Action at https://github.com/google/skywater-pdk-actions/tree/main/run-drc-for-cell-gds-using…
-
This might be the case for other SRAM macros. 5.0V timing parameters should be used instead as Caravel runs @ a single 5.0v supply.
-
After using the sky130 PDK, I was trying to test the tool with a proprietary PDK for a different technology.
In order to do that, the instructions from the "Porting a PDK" documentation section (ht…
-
Hello,
There is another problem with the setup, with GF this time. At the very first steps, when cloning the repos.
In the main Makefile when cloning `https://github.com/efabless/caravel-gf180mc…
-
Run command `make verify-la_test1-rtl` in _caravel_user_project_ fail with the current message:
`gf180mcuC/libs.ref/gf180mcu_fd_sc_mcu7t5v0/verilog/gf180mcu_fd_sc_mcu7t5v0_udp.v: No such file or dire…