-
Hello,
I run rtknavi on two versions b33 and b34, how ever as soon as rtknavi receives corrections from CORS server, glonass satellites turn to grey(inactive) leaving only gps and therefore the solut…
-
Using hackrf one + gps antenna.
GNSS-SDR receives nav messages, but doesnt provide solution
![Screenshot_20231108_160822](https://github.com/gnss-sdr/gnss-sdr/assets/52666076/b815fccf-08af-4efd-b8f2…
-
You need to have physical android device for this task since emulator doesnt work for sensor things
-
I have a T-Beam Supreme version 3.
I am writing an application to create an autonomous GPS data logger that will run unattended in my vehicle. testing so far has been good apart from one issue whe…
-
Hi,
I've been going through the libRTK source code. Where the GLONASS satellite-position is caluclated from the broadcast ephemeris, it seems to be missing the conversion from PZ-90 to WGS84 (per …
-
Hi Ketil,
Based on my experience with Stratux receiver, I thought it might be useful to add GPS module support to your project.
For example VK172 USB or similar module for GPS/GLONASS. It cost ±5…
-
There is no init.m in glonass receiver.
-
https://github.com/osqzss/gps-sdr-sim
-
I have a raw data stream in format oemv4 which is written to file. It is contain such packets as PSRPOS, BESTPOS, RANGE, GLOEPHEMERIS, GPSEPHEM, GLOCLOCK. After conversion file .obs contain info abou…
-
If I use default ( gps only) config everything work on the galactic branch.
zed_f9p.yaml
gnss:
glonass: True
When I enable glonass I get this error.
`[ublox_gps_node-1] [DEBUG] [16…