-
I'm porting a c++ project, that uses this library *(v1.2.5)*, from *Jetson Nano* to an *Jetson Orin Nano*. The GPIO used to work on the Nano, but I'm having problems on the Orin. On the first `GPIO::s…
-
I needed to use the `Gpiod.line_event_read_multiple` and found that I needed to construct the C struct of the `Gpiod.gpiod_line_event` myself, to read the different types of events.
I didn't know …
-
### What are the steps to reproduce?
Run node-red in the official docker container.
Verify that the gpiod nodes have connection to the gpiod (daemon). ![Skærmbillede 2020-02-09 kl 23 14 03](https…
-
Please learn to use gpiod and stop using wiring pi . People may want to use this on other boards then a raspi and wiringpi breaks on other systems
-
I have version .5 of this library working on an rpi 4 but I'm doing some testing on an rpi 2 zero w and after downloading v1.0 I'm getting this error with the new call gpiod instead of RpiGPIO (using …
-
The optional parallel port interrupt is supposed to be generated on a low to high transition on pin 10 (nACK).
http://www.makelinux.net/ldd3/chp-10-sect-1
http://retired.beyondlogic.org/spp/para…
-
Hello,
tried to use this HACS integration and failed to make it works because of this error :
https://forums.raspberrypi.com/viewtopic.php?t=361218
I think it could be interesting to create a…
-
Currently there are 2 different nodes to interface with the raspberry pi hardware (GPIO pins):
- [node-red-node-pi-gpio](https://flows.nodered.org/node/node-red-node-pi-gpio)
- [node-red-node-pi_g…
-
Hi, switched to your library recently as Kernel 6.6 broke one of my MagicMirror modules.
Would be grate to be able to set pull-up or pull-down for pins while registering them.
-
Any plans to support the ST7789**V** variant?