worlickwerx pi-parport issues

worlickwerx / pi-parport

retro parallel port for raspberry pi

GNU General Public License v2.0

67 stars 12 forks source link

issues

Newest

Newest Most commented Recently updated Oldest Least commented Least recently updated

Add limitation note to README.md on bidirectional control pins.

#73 quorten closed 1 month ago
3
v5: update bill of materials and adjust 2x20 footprint

#72 garlick closed 1 month ago
4
add scripts to produce JLCPCB manufacturing files

#71 garlick closed 2 months ago
0
ci: add kicad ERC/DRC checks for v5 hardawre

#70 garlick closed 2 months ago
1
ci: drop deprecated ubuntu-18.04 runner

#69 garlick closed 2 months ago
1
add initial v5 board

#68 garlick closed 2 months ago
11
consider the SMT version of the 40 pin GPIO header

#67 garlick opened 3 months ago
1
handle standby mode

#66 garlick opened 3 months ago
1
add cutouts for camera/display/pcie

#65 garlick opened 3 months ago
0
add a Qwiic connector

#64 garlick opened 3 months ago
2
add alternate DB25 connection(s)

#63 garlick closed 3 months ago
1
update design files to kicad 8 and run ERC/DRC in CI

#62 garlick opened 3 months ago
0
driver: fixes for linux kernel >= 5.10

#61 garlick closed 3 years ago
5
ci: drop ubuntu 16.04 test, add driver load test

#60 garlick closed 3 years ago
2
Update README.md

#59 ferdymercury closed 3 years ago
0
Advise for possible use for Diamond Rio MP3 player

#58 deanhuff closed 3 years ago
2
probe of ppgpio@0 failed with error -22

#57 cervellopl opened 3 years ago
7
Rpi 3 kernel 5.4.51 errors while make

#56 cervellopl closed 3 years ago
2
ci: migrate to github workflows

#55 garlick closed 3 years ago
0
README: point to v4 board + BOM, not v3

#54 garlick closed 3 years ago
0
driver, eeprom: Fix driver install issue, note on i2c-dev for EEPROM.

#53 quorten closed 3 years ago
0
hardware: Add DIP jumper to BOM.

#52 quorten closed 3 years ago
0
Use DIP switch and remove R1 DNP pads in future board revs

#51 quorten opened 3 years ago
4
does a PCIe parallel port card work with the CM4?

#50 garlick opened 3 years ago
8
avoid copying parport modules into pi-parport source tree

#49 garlick opened 3 years ago
0
explore possible kit offering

#48 garlick opened 3 years ago
11
R1 missing from the v4 BOM

#47 iguanatamer closed 3 years ago
11
Cannot compile Device Tree Overlay

#46 iguanatamer closed 3 years ago
2
add header for external shutdown button + halted led

#45 garlick closed 3 months ago
1
Errors on compilation under Raspbery Pi OS 64 Bit

#44 herrkuhn opened 4 years ago
1
add a real time clock to the pi-parport board

#43 garlick opened 4 years ago
9
Add make uninstall, cleanup trailing whitespace

#42 quorten closed 4 years ago
0
Add DT Overlay parameter for drive mode

#41 quorten closed 4 years ago
10
Investigate using a RaSCSI board as a pi-parport device

#40 quorten opened 4 years ago
2
Improve kernel portability and add ID EEPROM DT overlay support

#39 quorten closed 4 years ago
16
set up github actions, remove travis config

#38 garlick closed 3 years ago
3
Update gpiod_set_array_value call to new contract.

#37 zsolt-beringer closed 4 years ago
0
hardware: BOM improvements/fixes.

#36 quorten closed 4 years ago
0
hardware/v4: build and test

#35 garlick closed 4 years ago
4
hardware_v4: add bypass capacitors, reroute traces

#34 quorten closed 4 years ago
11
travis-ci: build kernel module in various environments

#33 garlick closed 4 years ago
0
hardware_v3: add BOM manufacturer part numbers

#32 quorten closed 4 years ago
8
pi-parport connected via SPI

#31 quorten opened 4 years ago
17
[v3] generate BOM

#30 garlick closed 4 years ago
3
[v3] the trace running under R5 is bad form

#29 garlick closed 4 years ago
1
[v3] add a bypass cap

#28 garlick closed 4 years ago
1
eeprom: add eeprom scripts and notes

#27 garlick closed 4 years ago
0
v3: test HAT EEPROM

#26 garlick closed 4 years ago
0
README.md: add OSHAPRK link

#25 garlick closed 4 years ago
0
rework hardware in KiCAD

#24 garlick closed 4 years ago
6