-
Are there any plans for I2C slave driver? I only found embassy example for I2C slave for rp2040 https://github.com/embassy-rs/embassy/blob/main/examples/rp/src/bin/i2c_slave.rs
Checked the i2c driver…
-
### Description / Steps to reproduce the issue
Hello All,
I am trying to use 2 esp32c6 devkit m, one as master and one as slave.
Slave spi cannot work. I tried solve it by myself but I can't. P…
-
The Raspberry Pi RP2350's Hazard3 RISC-V code includes the `Xh3irq` interrupt controller, which automatically works out which interrupt should be handled next according to their priorities and pending…
-
It is currently not possible to detect a line break on a UART using `stm32l0xx_hal_uart.h` and `stm32l0xx_hal_uart.c`.
This has been requested long ago [here](https://community.st.com/t5/stm32-mcus-p…
-
After updating the rustc compiler to `rustc 1.82.0-nightly (8e86c9567 2024-08-01)` from `rustc 1.82.0-nightly (c1a6199e9 2024-07-24)`, serial writes don't work properly any more.
Here is the minima…
-
Hello,
I'm running into an issue where configuring a static IP for a W5500 SPI ethernet chip does not work, but using DHCP works fine.
To test, I am using a recently generated `esp-rs/esp-idf-te…
-
In `stm32g4xx_ll_adc.h` `TEMPSENSOR_CAL2_TEMP` is set to 110 despite the datasheet saying that it should be 130 (degrees Celsius). I thought this was fixed in v1.5.0, but it appears to be wrong still …
-
I am trying to build the driver for the Luckfox Pico Mini B. Once I start the build process and once it hits the drivers/wifi part and tries to build the rtl8188eu it provides me with the following er…
-
```
~/.arduino15/packages/arduino/hardware/mbed_opta/4.1.5/libraries/STM32H747_System/src/STM32H747_System.cpp: In member function 'uint8_t STM32H747::readReg(uint8_t)':
~/.arduino15/packages/arduin…
-
Hello all,
Recently, STMicroelectronics updated STM32F4 HAL driver [1]. Some of the APIs are changed, like CAN. Do you plan to update included sources listed here?
[1] https://www.st.com/resourc…