-
### Category
Other
### Hardware
Heltec v2.1, Heltec V3
### Firmware Version
2.2.24, 2.3.1 and 2.3.2
### Description
https://github.com/meshtastic/firmware/assets/104385850/8b677067-3a11-48cd-…
-
Hello,
Last few days I am trying to get Heltec ESP32 working with TheThingsNetworks. I am not able to get the OTAA sketch working. When i upload the code to the board i am getting the following mes…
-
Hello,
i am unable to compile version 3.6.2 for heltec esp32-s3 v3.1 hardware. I try all 3 possible options in platfomio.ini
halfile = ttgotdongles3.h
;halfile = ttgotdongledisplays3.h
;halfi…
-
The Heltec miners in my area have frozen out all other miners. Heltec will only respond to Heltec beacons. Is this by design?
-
hi,
könntest Du bitte mal in 2.22 den Code Checken?
Ich glaube da fehlt ein Argument:
CG_scale.ino:340:6: note: declared here void printOLED(String aLine1, String aLine2, String aLine3) {
…
-
I am fairly new and any help would be appreciated.
I am using the Heltec WiFi Kit 32(V3) with the Arduino IDE version 1.8.19 and I am able to load other sketches that utilize wifi, OTA, Etc.. I …
-
Hello. I am trying the lorawan code on heltec wireless paper and it works fine. But when I add the code for e-ink display to it , both display and lorawan doesn't work. Please advise. Thanks
-
In your [documentation](https://github.com/HelTecAutomation/HeltecDocs/blob/master/doc/node/esp32/source/hardware_update_log.md), Heltec LoRa 32 v3.1 is not shown.
Also, v3.0 is now a dead link in …
-
I kindly request the inclusion of the Heltec Wireless Tracker board in the list of supported boards for PlatformIO. The Heltec Wireless Tracker board is an ESP32-based development board with built-in …
-
Would it be possible to support this particular board with the mcci arduino-lmic stack?
https://heltec.org/project/htcc-ab01/
It consist of a ARM Cortex M0+ microcontroller plus a Semtech SX LoRa …