-
Dear @mostaphaRoudsari @chriswmackey @chiensiTB,
I recently started to work on an hotel's renovation together with a mechanical engineer who, following my display of the actual capabilities of Honeyb…
-
We previously discussed implementation of measurement noise in the emulator model, and the implications on simulation time. But I thought a first step could be to reduce the resolution of the measurem…
-
this issue is to track the two-zone office model based on real practice experience by DeltaQ
-
## Functions
### Wood Stove / Furnace / Boiler
1. Wood stove in the lodge is a significant fire risk, among our greatest.
2. New stoves must be [EPA 2020 certified](https://pscleanair.gov/325/B…
-
This issue is to address a problem with the overwrite input to the living room heating setpoint. This setpoint is used to control the boiler for the whole apartment and if overwritten ,`oveTSetPum`, o…
-
The quick start code provided in the README is producing an error. Could you please review the code and error message below
```from boptestGymEnv import BoptestGymEnv, NormalizedObservationWrapper,…
-
## 公共组件库
我觉得对于我们内部，首先最重要的是建立一个公共组件库，可在线访问/版本管理/提交，最好带设计软件插件，这是芯语的作用
1. database+git
2. 版本管理：文件类型+文件版本
3. 树层次结构
## 设计文件
文件产生都要标准，并且各个工序各个软件使用的对应同一个零件的模型文件都要对应
各工程软件的输出方式标准，注意事项
* 重心为初…
-
Upon initialization of a simulation, the array of computational time ratio is reset here: https://github.com/ibpsa/project1-boptest/blob/master/testcase.py#L420. However, the attribute ``tic_timer`` …
-
hi, I ran the command **TESTCASE=bestest_hydronic_heat_pump docker-compose up**, but met the following error
Connecting to spawn.s3.amazonaws.com (spawn.s3.amazonaws.com)|52.216.162.3|:443... conne…
-
```
What 90.1 PRM Section(s) are relevant to this issue?
3.6.5.2 Parallel Fan box Thermostat Setpoint
Explanation of issue:
E+ does not support the control scheme specified in the PRM, which indicat…