-
I think the hal-i2c.ads lacks some comments on how to use it. Here are some ideas for modifications:
```ada
package HAL.I2C is
type I2C_Status is
(Ok,
Error, -- Err_Er…
-
- [ √] I have read the documentation [Espressif Audio Development Guide](https://docs.espressif.com/projects/esp-adf/en/latest/index.html) and the issue is not addressed there.
- [ √] I have upda…
-
Quoth @quorten in #4:
> Just wanted to comment, I also really like the idea of an board variant with an RTC on it too. Probably the best way to do this is with a single AVR microcontroller on the …
-
### Answers checklist.
- [X] I have read the documentation [ESP-IDF Programming Guide](https://docs.espressif.com/projects/esp-idf/en/latest/) and the issue is not addressed there.
- [X] I have updat…
-
Hi,
I use Arch Linux with the Ryzen 9 7900X and Asrock X670E Steel Legend and latest linux kernel (6.9.2-zen1-1-zen).
Motherboard sensors is missing.
In manual I found the motherboard chip mo…
-
Dear Olikraus
at first: Thank you for this magnificant library and the work you had with it!
I have the following issue:
On a custom board with ESP32-WROOM-32 support two OLED-Display
128x64, SH…
-
This issue attempts to describe all the known issues with the existing `i2c_agent` and how they should be fixed.
The `i2c_monitor` directly interprets the line content and creates response items (…
-
Hi, I have connected FM24C04B.
i2c scanner shows me this addresses:
```
01:07:29.324 -> I2C device found at address 0x50
01:07:29.324 -> I2C device found at address 0x51
```
but I have only one …
-
# Describe the issue
When I assign (in the zynthian interface, so not in the MOD web browser) the bypass of an lv2 effect (MOD-UI) to a controller , I cannot SAVE the snapshot…
# Configuration
…
-
# ESP32-P4 support status in ESP-IDF
ESP-IDF v5.3, currently in development, will include initial support for the mass production version of the ESP32-P4 chip.
In the list below, supported featu…