-
System Details
============
**System**: Raspberry Pi 4B + Raspberry Pi OS Lite (Bookworm, 64bits, No X)
**SDL version**: 2.26.4
**Audio devices** (names retrieved using `SDL_GetAudioDeviceName`):
…
-
The ESP32 supports I2S, so why not use the I2S output to connect a Audio DAC like this one: https://www.aliexpress.com/item/Interface-I2S-PCM5102-DAC-Decoder-GY-PCM5102-I2S-Player-Module-For-Raspberry…
-
### The problem
**Before the introduction of I²S Audio Component:**
media_player:
- platform: i2s_audio
name: ESPHome I2S Media Player
id: dac_speaker
dac_type: internal #th…
-
I've posted this in the FabGL forum as well. , It would be amazing if we could get ESP32S3 support added to to ESP32Lib. The S3 has two I2S channels and a lot of free pins. It lacks a hardware DAC, pu…
-
### Problem Description
I was trying to set microphone input gain on ES8388. I noticed that I am having I2C communications errors at the end of the setup:
```
I2SCodecStream i2s_st…
-
### Describe the bug
I tried to use the following code to play some wavfiles but unfortunatly it didn't work.
The MicroPython runtime keep complaining about ` I2S.MODE_MASTER | I2S.MODE_TX | I2S.M…
-
## Environment
- Development Kit: M5Stack
- Module or chip used: ESP32
- IDF version: v4.4
- Build System: CMake
- Compiler version: xtensa-esp32-elf-gcc (crosstool-NG esp-2021r2) 8.4.0
- Ope…
-
Hi,
I am using the ESP32 with 2 DAC outputs. I would like to use only 1 DAC and not both for the audio.
Is there a way or option to set it only mono?
On the ESP32, pin25 and pin26 are used (DAC1 …
-
## Environment
- Development Kit: ESP32-Wrover-Kit
- Kit version : ESP32-D0WDQ6 (revision 1)
- Module or chip used: ESP32-WROOM-32
- IDF version: v4.4.1
- Build System: CMake
- C…
-
So i built the example with a single transistor as a amplifier and it uses the TX pin connected to the base to control the frequencies. for my project it would be important to use some other pin as th…