-
The numerical solution for wave attenuation in sea ice employs time splitting, which is only order dtg accurate. It is a noticeable error when dtg > 500 s or so. I've included a pdf to illustrate the …
-
Il faudrait se penché sur la syntaxe les format pour l'export des évènements. On pourrait aussi faire une syncro google pour pouvoir directement envoyer les évènements au compte google de l'utilisateu…
-
Schematic Review:
- [x] PG signal should be \P\G\ or PG_N
- [x] On the BMS side there are only 2 GND pins (ran out ☹) and one of them would go to a wired power supply and it seems on the main si…
-
# Connector
Control board connects to an 8 pin RJ45 connect…
-
To make v1.0 usable one needs to implement several fixes:
- cut trace (copper polygon) to pin 16 of IC6 and IC4
![image](https://user-images.githubusercontent.com/4325054/217311092-d1e90bcb-e361-4e3…
-
Aarhus Letbane stations are just "Letbane," Odense Letbane stations are "Odense Letbane" - we can infer traction info and operator details from this. Could do similar for Metro and S-tog.
Could giv…
-
- [ ] Pull R166 to P12V0 instead of P3V3, optionally add R to GND
- [ ] make sure IC2 and IC3 are supplied from 12V via LDO or parallel Zener-based regulator
- [ ] use lower dropout LDO for 2.5V or …
-
In the schematic it looks like Mix In is the virtual ground to the inverting buffer (IC2.13) that creates GF (IC2.14). The Mix In is then used as an input to IC4.16 via C5, but Mix In is a virtual gr…
-
When doing bitwise conversion of int32x4->float32x4->int32x4 the bits aren't preserved for Firefox, when NaN patterns are present. This code:
```
var i4 = SIMD.int32x4(0x7fc00000,0x7fe00000,0x7ff00…
-
Dear all,
i just bought an Schwinn IC8 spinning bike and really struggled to connect it properly with my Garmin MARQ.
Thanks to this repository and some (hacking &) coding efforts I managed to:
…