-
Hi, many thanks for all the work around this project, it gives me many insights in data from my **Xtreme 36**.
I have a question or issue though and I'm not really sure where to start troubleshoot…
-
[rf_interface_ic3.txt](https://github.com/zxdavb/ramses_rf/files/9994700/rf_interface_ic3.txt)
Hi,
according to the Intergas Diagnostic Software (IDS) the Intergas HRE / Xtreme HVAC systems are …
-
domoticz 2022.2.14599 (error was also there in previous version 2022.1.14311)
i am getting this error sometimes
2022-11-08 20:10:36.563 Error: Intergas InComfort: Error getting current state!
t…
-
### The problem
Hi All,
I am using a long time Incomfort, but suddenly it is not working anymore.
The following message i got in the logs:
```text
Logger: homeassistant.setup
Source: setup.p…
-
### The problem
Today I changed the IP address of my Intergas Incomfort Gateway. I changed it in the configuration.yaml file, and then restarted. Suddenly all the entities weren't available anymore a…
-
### Describe the bug.
I get a `Unexpected error fetching plugwise data: 'modulation_level'` with plugwise-beta (v0.34.3).
My boiler (Intergas Kombi Kompakt HR 36/30) doesn't support the OpenTherm …
-
I am unable to change the Max CH setpoint.
My boiler is set to a maximum temperature of 80°C.
OTGW has a (default?) Max CH setpoint of 70°C
I tried setting it to match my boilers temp of max te…
-
Hi Erik,
Can I add Intergas to homebridge? I installed homebridge on rpi and add plugin otgw.
Do you have a video or guideline how to do?
Thank you
Trik
-
### The problem
Upon installing the Incomfort integration all entities exist twice in the system, once with a normal name, once with _2 in the name. Some examples:
```
water_heater.incomfort
wat…
-
bosch-xmpp --serial=xxxxx --access-key=xxxxx --password=xxxxxxx easycontrol bridge
results in: `HTTP server listening on http://127.0.0.1:3000`
note: if I change any of the xxxés to someting else I …