-
Investigate low-power pin states.
-
Would it be feasible to add support for the Teensy 3.1/3.2 boards?
Teensy 3 is an Arduino compatible development board. Arduino cor
ARM Cortex-M4, 72 MHz standard, 96 MHz overclocked
64kB RAM
256kB …
-
Something like the SiLabs HappyGecko or Kinetis KL27 would be a much better option than the PIC at a similar cost.
-
I've been using the `set_single_persistent_default_layer` function to switch base layers but the changes aren't persisted to EEPROM. I've also wired up a small LED strip and my understanding is that c…
ameyp updated
3 years ago
-
(I did not yet verify this with a scope)
The software CS is causing problems when moving between different clock polarity settings.
We discovered that the LIS3DH driver on mulle requires setting th…
-
Now that there are 4 chip architectures stm32, stm32F7, Kinetis and samv7
There is a need to isolate the stm32 arch specific code from the arch agnostic code for drivers (hrt in this case) and deriva…
-
When flashing a Kinetis device, pyOCD overrides the Flash Configuration Field with safe defaults, in order to avoid breaking/bricking the device. This is implemented as the method `override_security_b…
embed updated
4 years ago
-
Hi,
It seems that builtin targets for stm32f4xx do not have support for OTP area and that .FLM for it is present in the Keil pack and is the same for all of them.
Is it enough to just add additiona…
-
Hi,
Hoping for some assistance in rectifying an issue using LPC-Link2 with VirtualBox.
Host: Pop!OS 18.04 LTS
Guest OS: Ubuntu 16.04 Xenial under Vagrant.
Summary:
1. The LPC-Link2 works correc…
-
latest version of chibios changed the number of arguments for obqObjectInit
```
void obqObjectInit(output_buffers_queue_t *obqp, bool suspended, uint8_t *bp,
size_t size, size_…
cubiq updated
2 years ago