-
Hi @bsiranosian
I am trying run your tool but it is giving some error:
snakemake -s /home/rsharma/lathe/Snakefile --configfile /home/rsharma/lathe/config.yaml --cores 5
KeyError in line 109 of /ho…
-
When nothing happens, an error/warning is passed and not an "all good"
ex: below image when on wrong branch and everything still runs fine.
![Screen Shot 2023-02-10 at 10 53 01 AM](https://user-i…
-
we have to find a very reliable material for our project, one option is doing by 3D printer.
-
Let the user define a primitive shape, and also place a point on any side of it, and then lathe the primitive shape around that point.
This is useful to produce carved pins, pillars, discs, bowls, …
-
Hi
Hi have this problem with your release for lathe, if selected lathe = 1 from file main.ini the standalone tab DRO is not updated anymore.
Remove lathe = 1 make the DRO tab work fine.
This i…
-
Hi, when I want to start lathe I get the following error message:
Building DAG of jobs...
Pulling singularity image shub://elimoss/lathe:longread.
WorkflowError:
Failed to pull singularity image…
-
Greetings,
I finished the installation of the ELS on my SB 10k Lathe and is working properly with just one issue and one questionable/possible issue.
The display panel, when within a few inches …
-
Encoder should update counts ( int64 would be nice) as well as send velocity units so that G96 can work.
remora has encoders as does linuxcnc-rio for reference.
PCNT could be used but it is limi…
-
https://slpl.bibliocommons.com/item/show/1072962116_lathe_learnin
-
Quick one: after hacking lathe, an option to craft large syringes and x-large syringes becomes available, but after trying to do it lathe just spits out scalpels.