-
I can connect to my MaixPy via serial cable and I get the MaixPy welcome screen, but it doesn't respond at all to my keystrokes. I'm running minicom on Linux Mint connected to /dev/ttyACM0 at 115200 w…
-
I installed atcom as described, however I cannot connect to the Telit modem. Any AT commands result in the same error.
```
pi@raspberrypilte:~ $ atcom --port /dev/ttyUSB2 -b 115200 AT
[ERR] Could…
-
Good evening.
I was doing a IMSI-CATCHER and i get it. It Works perfect, i found a loot of MS and they information, but i cant find a my own imsi number. I made a lot test, putting my phone into G…
-
The fourth serial interface exposed by Sayma over USB is MMC Console. How to use it is discussed [here](https://github.com/sinara-hw/sinara/issues/358#issuecomment-380463815) and [here](https://github…
-
I can not get "hello world" response from screen or minicom in Ubuntu 22.
I can confirm it works because I can get a response via Hercules in Windows 11.
So somehow the steps in the published guid…
-
Hi,
I used NUCLEO-F401RE example uart04.
Compilation and linkage work.
I flash my board.
openocd -f board/st_nucleo_f4.cfg -c "program uart04.gcc.thumb2.flash.elf verify reset exit"
What config I ne…
-
Maybe it is not necessary to write our own mock program for the elevator. There is a linux program called `minicom` (http://www.cyberciti.biz/tips/connect-soekris-single-board-computer-using-minicom.h…
-
Some communication has been incomplete when using Pyserial on RaspberryPi. Yet while using minicom everything has been complete!
To solve this issue I suggest a new approach of using Minicom to log…
-
Steps to reproduce on macOS:
- Run `make` to build cbmbasic.dfu
- Run `dfu-util -D cbmbasic.dfu`
- Run `minicom -D /dev/tty.usbmodemC641`
- Pressing any key freezes cbmbasic
I also tried ano…
-
https://help.ubuntu.com/community/Minicom
or screen
or something