-
Hello,
I used to have the prusa link 0.7.1 running on Raspberry pi 2w zero on my Prusa MKS3+ printer. All good I decided to update to 0.8.1 and what I did was to flash the image on the Raspberry li…
-
Please report here your Seam test results.
[UPDATE] Please try rate how they look like but also how they "feel" like (haptic).
[Seam_test_v1.1.3mf.zip](https://github.com/3d-gussner/Prusa-Firmware/f…
-
**Printer type**
MK4
**Printer firmware version**
4.5.4
**Original or Custom firmware** - [Original/Custom]
Original
**Optional upgrades**
Nothing
**USB drive or USB/Octoprint**
U…
-
### Description of the bug
The new option --material-profile works with multi-material printers but gets silently ignored with single-material printers.
For the following examples, I set the filam…
-
### Description of the bug
the MK3S+ screen used to display total remaining print time and time remaining until next color change, and it would change about every 5 seconds. Now it seems to only show…
-
### Printer model
- [X] MK3S/+
- [X] MK3
- [ ] MK2.5S
- [ ] MK2.5
### Describe the feature
In the older firmware versions i could use "load filament" even when filament already had been loaded. the…
-
Hello,
/etc/systemd/system/webcamd.service is defined as follow :
```
[Unit]
Description=the OctoPi webcam daemon with the user specified config
# ConditionPathExists=/etc/octopi_streamer/mjpeg…
-
Please report here your Retraction test results.
Use the 3mf file below and try to pint it with PETG or some other material that tends to be stringy.
[Container_50x20_NoCore_v2.zip](https://github…
-
Any chance of a top part for the latest update that incorporates the fixing for the festo coupler?
-
Please report here your Speed test results.
Best to print it with FW3.9.0-RC3 or newer with **LA1.5 K values.**
Feel free to print with FW3.8.1 and LA1.0 K values.
Play around with the speeds and r…