-
### The problem
I've recently switched my Keba integration from the internal integration (based on unreliable UDP protocol) to Modbus TCP. So far this is far more stable and controllable, as TCP is s…
-
I have a box that allows me to talk to multiple (micro) inverters over a single modbus-tcp connection, but that box doesn't handle more than one TCP connection at a time.
To query all inverters us…
-
Currently I am not be able to communicate to the Growatt inverter via Modbus.
I have a Waveshare RS485 To Eth(B) connected to the Growatt MIN 3000TL-X to the Sys-com connector.
The network connectio…
-
Can an example program for Modbus TCP ---> Modbus ASCII be added?
-
Good Afternoon @RichiH ,
When I try to get the data from the records of my Ingecon inverter from the modbus exporter I see that the values obtained are not correct. For example, the first 6 record…
-
I have a Modbus client that is sending multiple commands with the click of a button to the Modbus server of OpenPLC. Sometimes, some of the last Modbus commands are not executed by OpenPLC.
### Det…
-
As the controller is already equipped with an Ethernet-connection threw WiFi, it would be great to have an read- out and -in (DVCC values) over Modbus TCP.
I’m actually building my Battery setup, wer…
-
I have multiple [Heatmiser Modbus Room Thermostats](https://www.heatmiser.com/modbus-thermostat-series/).
Is it possible to describe a device type and then specify multiple device ids for that devi…
-
### Description
**UPDATE** - I've just tested it with firmware release v1.23 -0 and it works, at least the provided samples seem to.
I've tried for most of the day yesterday to get this to work …
-
Today i saw the message „Failed to setup“ in the integrations panel. Logs show Python errors see below.
I‘m using HA Version 2024.10.0. It last worked with 2024.9.x
Logs:
Logger: homeassistan…