-
## Issue template
- Hardware description: esp32 wroom32 nodeMCU dev board
- Installation type: downloaded zip library and included it in arduino IDE
- Version or commit hash: humble running micro…
-
Hello, really nice that you got the LivingColors gen 1 working again in 2023, with a esp8266.
I followed you instructions, but could not find how to find the adress of the lights.
I also tried to …
-
I noticed an issue (not sure if is my mistake) when using the library with nodemcu, no updates are send after the first one at the initial startup. For example, similar code with Arduino works fine.
…
-
I had tried to upload example sketch "FadeUp" to NodeMcu 1.0 (ESP-12E Module) but I get the following error message:
Arduino:1.8.11 (Windows 10), Plošča:"NodeMCU 1.0 (ESP-12E Module), 80 MHz, Flash…
-
If the train is powered on for a certain time, the NodeMCU is not available via MQTT anymore as it drops out form WiFi. This can happen after an hour, after a couple of hours, sometimes not at all thr…
-
I just used pins such as D5, D6 instead of 5 and 6.
And just hooked the sensor up to 5v and ground from another source, ignoring pin 4 and 7.
-
use this fix for using esp32 nodemcu v3 Arduino Lolin compile error Homie v2.0.0
source:
https://issueexplorer.com/issue/homieiot/homie-esp8266/711
` the fix is to add WiFiClient _wifiClient; to…
-
On HC-SR04 connections:
http://www.14core.com/wiring-esp8266-nodemcu-with-hcsr04-ultrasonic-sensor/
https://tinker.yeoman.com.au/2016/01/15/esp8266-smart-shelf-part-2-nodemcu-arduino-ide/
-
## 문제
- 조도 센서와 토양습도 센서가 아날로그 Input 을 사용
- 그러나, NodeMCU는 아날로그 Input 을 1개만 받을 수 있는 상황
## 해결 방안
- 다이오드를 이용해서 아날로그 Input 을 스위칭 하는 방법
- http://www.instructables.com/id/Multiple-Analog-Inputs-on-On…
-
### The problem
Hi!
DFRobot Lightning Distance Sensor AS3935 not found.
But there is no problem with this board under Tasmota 13.4.0 (sensors)
![as3935_esphome_1](https://github.com/esphome/issu…