-
I got this warning when I exported my hair in maya 2019 by using TressFX pulgin.
What happened?
-
I implemented your nurbs curve. But how can i control each point's slope or smoothness, For example. some points needed to be smoothed or curved and some points needs to be rough or straight point wit…
-
### System information
- **SolveSpace version:** All
- **Operating system:** All
### Expected behavior
The attached sketch should not have naked edges.
### Actual behavior
The sketch f…
-
We should take advantage of new MFEM 4.6 features after #19112 is merged.
> FWIW: I would like to offer my assistance in this endeavor. My visit development work is virtually non-existent. But I ha…
-
### System information
- **SolveSpace version:** master @ 56719415dea4de7af750227653362f4c8cad78f8 (3.0)
- **Operating system:** macOS 11.5.1 (Big Sur)
### Expected behavior
Opened [turc-nur…
-
### System information
- **SolveSpace version:** All
- **Operating system:** All
### Expected behavior
Helical surfaces should be mathematically correct - or as close as possible to correct.…
-
In CAD software , I interpolate a nurbs curve , now I want to move the control point of the start and end point , it means move the control point of the start and end control point ? Then how to gener…
-
The R(fx) results using the forward solver "Scaled Monte Carlo: Nurbs" appear to be less accurate for fx=0 compared to the results using "Scaled Monte Carlo: Basic". This is perplexing to me because …
-
Hello,
I am recently dealing with Isogeometric Analysis (IGA) for the issue [https://github.com/mfem/mfem/issues/4238](https://github.com/mfem/mfem/issues/4238), but I am by far not an expert on I…
-
There are the two concepts FEM and IGA. In FEM almost everything is implemented on a reference element. In IGA the geometry is described by NURBS and NO reference elements are defined. In order to tak…