-
**Describe the bug**
Running nut 3.3 on Ubuntu 22.04.1 gives AttributeError message and not working.
```
$ python3.10 nut_gui.py
Failed to load config file: conf/nut.conf
Traceback (most recen…
-
````
...
0.007398 [D2] Entering run_snmp for 1 IP address range(s)
0.007411 [D1] nutscan_scan_ip_range_snmp: Scanning SNMP for IP address range(s): (1)[10.94.56.0 .. 10.94.56.255]
0.007774…
-
the library does not provide type definitions for [NUT15](https://github.com/cashubtc/nuts/blob/main/15.md).
please add them.
this is how i'm patching it for now.
feel free to use the code.
```ts
…
-
On the Z motor mount, the lower diagram, I really needed M3x10, not M3x8. Since they are hard to install, it would be good to have it right from the start.
-
Hi,
A week ago I setup NUT Server on a Raspberry Pi 3 connected with USB to **Powerwalker VFI 1500 RMG PF1** UPS.
`nut-scanner` detected it like
```
[powerwalker]
driver = "nutdrv_qx"…
-
**Is your feature request related to a problem? Please describe.**
after so many tries and errors of installation on my own macbook, would you please release macos cli and macos nut-gui for download
…
ghost updated
2 months ago
-
PLease make a compatible version with nut.exe. It is more stable than other installers thank you.
-
There are many patches out there, and very probably some interesting:
https://cvsweb.openbsd.org/ports/sysutils/nut/patches/ replicated at https://github.com/openbsd/ports/tree/master/sysutils/nut
…
-
# Problem/Motivation
> NUT fails to start on RiPi using standard HA image due to USB permissions
## Expected behavior
> NUT can scan the USB bus to find the UPS
## Actual behavior
> lib…
-
Hello,
I'm trying to configure NUT on proxmox using the following link (https://www.kreaweb.be/diy-home-server-2021-software-proxmox-ups/) but when i use the command "nut-scanner -U" it doesnt rep…