-
In a Hyper-V "Generation 1" VM (on Win11 Pro 22H2), ToaruOS 2.2.0 hangs at the "T" boot logo (and, in VGA Text Mode, at "Jumping to kernel...", with no serial output when booting with "Debug output" s…
-
We have several issues with calibration. One is precision (#86). Another is that calibration depends on the objective (#75 #76 #61) and the camera resolution (#74 #6). Finally, calibration requires th…
-
I'm in the US with split phase 120V/240V AC power. I just set up my first expandable meter, starting with one of my subpanels where all I want to measure right now are a few 240V HVAC appliances which…
-
### Overview
This is related to the now-closed #9674 which I believe was closed in error.
It is extremely difficult to precisely calibrate (within 100um) of the bottom of a labware well without ph…
-
I built the latest version of the afterburner and I'm trying to use it to program some Lattice GAL16V8B chips. I'm using one of the newer MT3608 modules where I had to replace the 2.2K resistor with …
-
The IEC 61400-12-2 requires the length of the tube used during the anemometer calibration to verify whether if the installation of the anemometer is in line with the guideline's requirements. As a res…
-
### Describe the Bug
I have tested some PAL GunCon 2 games and found out that the Calibration Shot does not work sometimes as it should:
- Vampire Night PAL (SCES-50411) is not working at all. I'm …
-
Was just looking at adding ADC2/ADC3, but adc's are a fairly big target feature wise so a full list of features and implmentation status seems like a good starting point (from RM0394 "ADC main feature…
-
We will attempt setting two-channel planetarium dome by using two projectors. Is it possible?
Please guide us how to set it.
Thanks.
-
Hi
I have Pyton 3.6 32bit (My CPU is intel i7)
NooElec RTL2832U & R820T RF key
PothosGUI vc14-x64 (Cubic SDR work well)
Zadig 2.3 (Bulk-in, Interface (Interface 0) -> WinUSB (v6.1.7600.16385)
…