-
[Faraday_PoorSolders.zip](https://github.com/FaradayRF/FaradayRF-Hardware/files/645487/Faraday_PoorSolders.zip)
The attached zip folder contains images showing some poor U1 CC430 solders I discover…
-
Hi WendyTeslaburger - I am super impressed w/ your project and have been hoping someone would put together a small production run of the PCBs.
1. has anyone produced a batch of assembled PCBs or i…
-
Hi
I recently contact JLCPCB service to produce PCBs for SDRAM XSD v2.5. I used this gerber file: https://github.com/MiSTer-devel/Hardware_MiSTer/blob/master/releases/sdram_xsd_2.5.zip
Unfortuna…
-
Discussion on hierarchy of requirements to fulfill
Example:
1. Robustness and compliance to standards
2. Ease of build
3. Price
-
With 30+ years experience, NOD Electronics offers 35,000 square meters per month capabilities of making printed circuit boards, FPC, HDI, rigid flex, multi-layers. Assembly and box build services are …
-
Hi
As suggested in your readme, my 64*64 panels happen to have the 74HC245 ic's.
I was reading about the adapter board you came up with, and was wondering whether it comes with all the components a…
-
Hello,
I am building an Open Spritzer for someone in my department, and I have a few minor suggestions to improve the PCB:
*I think in your design D3 should be a Schottky diode, not Zener.
*Ma…
-
As the manufacturing abilities of the PCB houses keep getting better, it is possible to create very complex artistic PCBs that take advantage of the effects of overlapping layers to get varying colors…
-
**Note:**
This is purely an enhancement Idea.
**Idea:**
In my opinion the addition of a second RJ-45 port, along with the necessary switch on the PCB - or an Additional board - would improve the …
-
**What has to be done**
Must decide on power supply / voltage adapter for ventilator:
* must provide enough power for PCB, valves, RPi and touchscreen
* must fit in enclosure
* must be reliable (p…