-
Bonjour à vous
Quand je clic sur "install" il télécharge puis il m'écrit ça: @picovoice/porcupine-node@2.2.1: This version is no longer supported. Please use the latest version.
Je n'arrive pas …
-
https://medium.com/picovoice/no-way-google-build-your-own-wake-word-service-on-android-339a0189ff4c
-
**确认已寻找过答案**
我已确认在 [Github issue](https://github.com/wzpan/wukong-robot/issues) 页、[常见问题](https://github.com/wzpan/wukong-robot/wiki/troubleshooting)页、[文档](http://wukong.hahack.com) 中都查找过，没有找到类似问题和资…
-
Hello, I have followed your instructions with an RPI4B+ 8GB. Lumina starts just fine, I think, after everything installs without any errors. It detects me when I say Lumina and it flashes what I say …
-
error: failed to run custom build command for `jarvis-app v0.0.3 (C:\Windows\System32\jarvis\gui\src-tauri)`
Caused by:
process didn't exit successfully: `C:\Windows\System32\jarvis\gui\src-taur…
-
Hi Guys,
I am getting this output, when I use Porcupine or Snowboy as wake word.
It seems, that the Hardware I am using is not safe identified.
Armbian Legacy (Armbian_21.02.3_Rockpi-s_buster_leg…
-
hello,
Where i can find the log, i try a x86-64 test before go to orange pi, and i have good docker porcupine, whisper, mm but no work... and i have no log..... hard for debug
Thk
-
Excellent instructions. I'm hung up on just these few things. Any suggestions? I'm adding this into my CM4 XGO-lite Robot Kit V2 in hopes of making the robot intelligent =)
pi@raspberrypi:~ $ cd /h…
-
Hey, I am trying to use your iOS SDK via Cocoapods and after following every step as given in the documentation, i can't seem to be able to fix the following errors. Could you please point me in the r…
-