-
```
On some boards (maybe those with the FT232RL datecode 1138 (2011 week 38)),
uploading seems to fail with the avrdude 5.10 in Arduino 1.0 using the
"arduino" programmer type. With the stk500v1 p…
-
```
On some boards (maybe those with the FT232RL datecode 1138 (2011 week 38)),
uploading seems to fail with the avrdude 5.10 in Arduino 1.0 using the
"arduino" programmer type. With the stk500v1 p…
-
```
On some boards (maybe those with the FT232RL datecode 1138 (2011 week 38)),
uploading seems to fail with the avrdude 5.10 in Arduino 1.0 using the
"arduino" programmer type. With the stk500v1 p…
-
## Description of the Issue
1. **BOM Error**:
- The BOM contains inconsistent information for the capacitors **C3** and **C5**:
- In `bom.xlsx`, it specifies the incorrect part name:
…
-
In Arduino IDE 1.8.5, on Windows 7 64bit, but as yet, untested on Linux.
I can create and edit `boards.local.txt`, in the same location as the installed `boards.txt`, and see my new boards on the t…
-
Hi,
Set up a spare Raspberry PI Pico as a Picoprobe (as described in https://datasheets.raspberrypi.com/pico/getting-started-with-pico.pdf Chapter A) and tried to upload a sketch using a programmer…
-
```
On some boards (maybe those with the FT232RL datecode 1138 (2011 week 38)),
uploading seems to fail with the avrdude 5.10 in Arduino 1.0 using the
"arduino" programmer type. With the stk500v1 p…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
```
What steps will reproduce the problem?
1. attiny sketchbook/hardware per http://hlt.media.mit.edu/?p=1229
2. ATtiny85 selected as board in Arduino IDE
3. Upload using usbasp programmer
What is th…
-
Hello, I would like to first apologize in advance if I am not raising this issue in a proper way, or if this is a nonissue and I am using the code incorrectly, or if it has been already fixed and will…