-
nRF24L01 2.4GHz Radio/Wireless Transceivers How-To
http://arduino-info.wikispaces.com/Nrf24L01-2.4GHz-HowTo
data sheet
http://yourduino.com/sunshop2/index.php?l=product_detail&p=188
-
Are there any plans to replace the internal `PhyRxTx` and `Timings` traits with ones from a trait crate, similar to `embedded-hal` but for radios? There is a [radio-hal](https://github.com/rust-iot/ra…
-
@mbalmer and I have spoken on the Matrix/Element that a feature enhancement for trx-control should include the ability for extension functions to be executed automatically by trxd without a separate t…
-
Hi Ryan,
Could you possibly add support for the Hermes Lite2. This is a popular amateur radio kit transceiver.
I have the necessary OOT blocks running on GR3.10 under Ubuntu 22.04LTS on a PC and…
-
Hi there,
I have LoRa gateway (RAK831) which has sx1301 chip for LoRa connectivity. My nodes are based on sx1278 chip. Frequency band is 433Mhz. In selecting the target radio transceiver sx1301 is no…
-
Is it possible to use rpitx for transmitting recorded AIS wav file?
> An AIS transceiver normally works in an autonomous and continuous mode, regardless of whether it is operating in the open seas …
-
Hi,
I try to teach-in the NodOn MicroSmartPlug without any success for hours now. I hope you can help.
openHAB: 2.5.3
212 │ Active │ 80 │ 2.5.3 │ org.openhab.binding.enocean…
-
Hello.
Could you clarify if this repository (https://github.com/db4ple/UHSDR) is meant for Sparrow transceiver 4" ? (transceiver like this one https://www.youtube.com/watch?v=tdZ0NiOfhTg ; that yt …
arekm updated
1 month ago
-
For full Doppler tuning on amateur radio transponder satellites, a calibration feature is needed to apply an offset to the calculated Doppler shift on the uplink, downlink, or both. This is required d…
-
Discussion [here](https://community.openhab.org/t/new-openhab2-enocean-binding/39917/551?u=fruggy83)
I will implement this