-
### Describe the bug
If I configure systemd to start ptp4l as a service, it fails like this
```
Jan 22 15:04:20 helios ptp4l[705]: [6.458] driver rejected most general HWTSTAMP filter
Jan 22 1…
-
Just compiled and installed the latest code from github on my old desktop PC:
```
git clone https://github.com/aristocratos/btop.git
cd btop
make
sudo make install
```
But when I start, it cr…
-
Hello n0bel,
First, I think you PiClock really rocks.
I am trying to install it on my Raspberry Pi model 4B with Raspbian Bullseye installed (the Pi would not start up with Stretch).
I followed all…
-
https://www.omglinux.com/raspberry-pi-os-update-may-2023/
Let see if "A substantial uplift, the newer kernel offers improved hardware support, new drivers, performance boosts, and better security."…
-
Hi,
Thank you very much for your project. It's really great!
I have to admit that the documentation in src/uart.rs (https://docs.rs/rppal/latest/rppal/uart/index.html) is much more clear than the …
manio updated
2 months ago
-
Apparently the driver does not work properly with Raspbian Bullseye on Raspberry Pi Zero 2. Indeed the screen just flash during the boot for few seconds (with Raspbian boot logo) and it turns to blank…
p3p1 updated
2 months ago
-
**Describe the bug**
The PIO-based SPI driver for the Raspberry Pi Pico (and the RP2040 in general) sends data out the SPI bus in the wrong byte order when SPI_WORD_SET() is 16 or 32 bits, and revers…
-
I am using raspberry pi zero 2 w.
While using i2c communication is necessary
i2c.setTransferSpeed(100000)
is executed
error: Clock delay is higher than cdiv/2.
The Raspberry Pi is stuck with an e…
-
## Affichage de l'heure
En tant qu'utilisateur, je souhaite pouvoir voire l'heure actuelle sur l'écran.
### Valeur pour le client
Le client peut consulter l'heure actuelle.
### Description
Un écran…
-
### Describe the bug
I am using a Waveshare 2-CH CAN FD HAT Rev2.1 with a Raspberry Pi 5 running Raspberry Pi OS. I have connected the CAN hat to a microcontroller that echoes anything back that is s…