-
Me again.
#### Overview of the Issue
Following advice given yesterday on this site ( #1670), I installed Screenly use link found in this page:
https://github.com/Screenly/screenly-ose
and in cli…
-
### Prerequisites
- [X] I have checked the [Wiki](https://github.com/AdguardTeam/AdGuardHome/wiki) and [Discussions](https://github.com/AdguardTeam/AdGuardHome/discussions/categories/q-a) and found n…
-
This is a tracking issue for our project to improve the PlanktoScope's software update process in order to reduce the barriers for users to update their PlanktoScope software deployments.
## Motiva…
-
Connect to http://fullpageos.local/FullPageDashboard/ from another computer on the same network and edit dashboard tabs as you wish, then restart the raspberry pi
You can set the time for each tab b…
-
Hello, thank you first and foremost for your excellent work! I have a UPS expansion board with a rated voltage of 3.7V, which allows for the parallel installation of two 18650 batteries, each with a c…
-
Hi! Thanks in advance for all the work you've done!
I successfully installed everything but i was wondering how i should edit the config file to run the dashboard from a pc not connected to the same …
-
This is a tracking issue for our project to automate the PlanktoScope software release process in order to reduce the work needed for each release.
## Motivation
Currently, there is an entirely …
-
#### What were you doing?
I edited the fullpageos.txt file to have http://localhost/fullpagedashboard, as indicated by the setup page. I then went to the fullpagedashboard.txt file and put in the s…
-
### Requested feature:
During a print I spend most of my time on the Webcam tab so I can keep an eye on the print and any potential issues. It would be super handy if I could also see some live print…
-
First off - sweet framework! I love it! thanks for creating this :)
We wanted to run an office dashboard so we got a Raspbery Pi to connect to a TV. Raspbery Pi was having a bunch of issues render…