-
I originally posted this in the wrong github area. Hopefully this is the right one.
### The problem
I'm new to ESP Home. RATGDO is my first ESP Home device.
I'm not entirely sure what ESP Platf…
-
After power outages for my jackshaft 1.0+ door openers, my doors enter an uncontrollable state where they open randomly until the ratgdo is restarted. I have tested this with MQTT and ESPHOME firmwar…
-
Hi, I built the ESP32 board using [this schematic ](https://github.com/Kaldek/rat-ratgdo/blob/main/schematics/ratgdo%20open%20source%20ESP-32_schem_v6.png) and connected it to a Esp32 using the GPIO p…
-
I have a 2.5i board and had issues connecting to 2.4ghz channel on my router. I had to set it to legacy mode to get it to connect. Because this board uses an esp8266 chip, I did some research and foun…
-
### Describe the feature request
Hi
There are some Ratgdo alternatives out there locally to me in Canada.
Just wondering if anyone has tried your homebridge-ratgdo plugin and had it work when usi…
-
**Behavior**
With the ratgdo wired in, all functions work in homekit (and with hardware controls), EXCEPT the 'door close' function
When attempting to close the door, it starts down the track fo…
-
Ratgdo 2.5i board with current firmware build using with Chamberlain B1381 opener,
The status values are working, but no command functions. Tried with MQTT version as well and getting same lac…
-
**Hardware:**
Liftmaster 8500W
RATGDO 2.53i
Not using dry contacts, just using the 3 wire install
Home Assistant 2024.4.3
**Issue:**
When the door is open, the sensors are blocked, and a door …
-
Everything seems to work fine functionally with the garage door opener itself, but when I use the ratgdo to toggle the light it throws the "lock" function out of sync with the wall control. I'll do m…
-
I flashed the latest MQTT+wifi firmware (v2.54) on my new device (v2.52i), and after initial device configuration (wifi and then MQTT params + password), I am not seeing MQTT successfully connecting, …