-
**Describe the bug**
I was able to use HF_COLIN standalone mode up until commit [daae890].
Every version after that fails during the "WRITING FLASH" procedure and the Proxmark timeouts.
Also new SP…
-
Hi,
I have the Proxmark 3 RDV4 and tried simulation of a legic prime card.
I saw the #83 and I thought at first that I had the same issue, but the version I am running already has the timeout set to…
-
I am getting HF Antenna Unusable error. I am using the latest version of this repo and have flash the firmware too. bdw, I am doing this for windows. LF Antenna works fine. Please check the attached f…
-
Hi,
How is the procedure of unbricking?
Which tools are needed-same as for pm3rdv2?
-PROXMARK 3 RDV4 - FLASHING SUPPORT (https://lab401.com/products/proxmark-3-rdv4-flash-support)
And which othe…
-
here
https://github.com/iceman1001/proxmark3/blob/master/common/i2c.c#L46
standart i2c init. but... if you reset CPU in i2c exchange cycle you will have "hanged" i2c. in this situation you can unha…
-
Since this repo wasn't created via the "fork" button on the iceman1001 (or even the proxmark/proxmark3 repo) you can't easily create a PR for the upstream or iceman1001 repo _and_ this repo with just …
-
always show "Trigger kicked!" when using "hf snoop". i try to snoop a key from m1 card and reader by using pm3. when i type hf snoop command then put pm3 near the reader i will receive "Trigger kicked…
-
**Describe the bug**
Get #db#messages at first start of client:
[=] UART Setting serial baudrate 460800
#db# unknown command:: 0xd32d410d
If I exit client next time this message doesn't appear
…
ghost updated
5 years ago
-
**When writing an EM ID to a t55 the command "lf t55 detect" no longer detects the modulation automatically**
**Command output below:**
pm3 --> lf sear
NOTE: some demods output possible binary
…
-
now i use ChameleonMini live debugger, but i think this app is hard to learn to use than windows GUI by iceman. I still did not know how to upload a dump file to my devices. i think iceman GUI for win…