-
### Describe the problem
I can't get the driver to load and connect to a USB Port.
It looks like the serial service is not starting.
### Driver version
nightly build "v1.3.20240510passthrough"
#…
-
### Describe the bug
I recieved the #8 Internal calculation error two time the last day (fresh setup) with the latest driver version.
First time this occured was yesterday. I connected 1 of my 3…
-
### Describe the problem
After the restart from Venus OS there are no coming all Seplos BMS or sometimes there are no BMS at the device list.
My solution for that is to unplug the original Venus U…
-
### Describe the bug
I swapped out the batteries connected to my JKBMS (from 100Ah to 280Ah), but systems 15s. I changed the maximum charge/discharge capavilities, and the total Ah in the BMS direc…
-
### Describe the bug
the BMS Shows 100% on Both (LltJbd)
the VenusOS 96% and 100%
![image](https://github.com/mr-manuel/venus-os_dbus-serialbattery/assets/6553835/42a0af75-e66e-4110-9ba0-b5d480c9ec…
-
### Describe the problem
Hallo,
using 2 DIY Batteries in Parallel , connected via rs485 (tty0 and tty1) to victron cerbo.
Battery Agreggator
![image](https://github.com/user-attachments/assets/1…
-
### Describe the bug
Battery gets disconnected in the OS. It was working fine for months.
As you can see in the logs: the soc value is None and the software terminates.
### How to rep…
-
Thanks for this great Lib. It works wonderful for my MQTT Bridge.
I'm creating a BLE reader for Renogy LiFePo Batteries (https://github.com/distancerunner/Renogy-Battery-ESP32-Bluetooth-MQTT-Bridge…
-
### Describe the problem
Describe the problem
A connection problem occurs several times a day (NO BMS). after a restart everything works again. After some troubleshooting it seems the bms is goi…
-
### Describe the problem
My system: EasySolar-II GX, 6 x 50 Ah 17s LiFePO4 with JBD (Jiabaida) SP22S003 BMS. BMS communication is BMS UART Isolation module ADUM1201 Generic USB to TTL module USB…