-
Predefined rules to Hexagonal method.
Sphere placement rules:
1.5cm in diameter.
Placed on axial planes of CT acquisition.
High dose spheres (PTV_6670) and Low Dose Spheres (PTV_Avoid) are 3cm (cent…
-
### Bambu Studio Version
1.8.2.56
### Where is the application from?
Bambu Lab github releases
### OS version
OS: Windows 11
### Additional system information
_No response_
### Printer
Bambu …
-
### Printer model
Prusa XL
### Firmware version
6.0.4+14924
### Upgrades and modifications
None
### Printing from...
USB Drive
### Describe the bug
After a filament change operation, the prin…
-
### What happened?
Im not sure if this is abug. Im printing simple cone shaped objects and on all of them I get a sort of seam. It is not technically speaking a seam, there is no retraction made of …
-
- Respiratory Pattern
- Cardiac Rhythm
- Retractions
- RT RS Secretion amount
- Cough
- Capnometry
-
### What happened?
If i create a Retraction calibration test with a step 0,1 , 0,2 , 0,5 the steps after slicing on the right side are set to 0,1 steps every time.
only if if i use the steps 1 or 2 …
-
### What happened?
**Behavior**
I am using a corexy on Klipper. After a tool-change, filament just oozes out due to pressure inside the hotend. Theoretically, this setting should be able to retract …
-
Certain filaments get chewed up in the extruder if too many retractions happen in a short period. Clearing out a jammed extruder has cost me a lot of time already. In Cura for example, the option "Max…
-
This is a follow up on the work here https://github.com/mainsail-crew/mainsail/pull/1988 and more of a starting point for a discussion - not actually an issue!
I've now implemented that change on t…
-
### Is your feature request related to a problem?
currently the dynamic lifts tool sets the retractions to a set speed from file settings, not enough control over this movement section
### Describe …