-
Hi,
currently the adapter creates a default set of datapoints, even though the weatherstation does not support them.
For my WS3500 roughly half of the created DPs are not used, showing NULL.
Plea…
-
Hi, leider wird der neue Datenpunkt nicht aktualisiert heute 8 Blitze aber nicht im Adapter zu sehen.
sainlogic.0.weather.daily.lightning_num
![Screenshot_20230513_160149_Gallery](https://github…
-
**Describe the bug**
Bei mir laufen zwei identische ioBroker-Server auf unterschiedlicher
Hardware. Auf dem ersten Server ist des problemlos gelungen die …
-
**Describe the bug**
During (inital) startup the follwoing warning ist reported:
sainlogic.0 | 2022-06-25 19:58:37.799 | info | State value to set for "sainlogic.0.info.last_listener_update" h…
-
Hi,
ich bin neu im IOBroker und dem ganzen Kram, denke aber ich habe einen Bug gefunden.
Ich habe die WS3500 Sainlogic Station seit ein paar Tagen im Einsatz mit der neusten Firmware 2.0.38
Außerd…
-
I use a WH2650A station, the most thinks work fine but the sainlogic.0.weather.current.dewpointtemp shows (null).
-
**Describe the bug**
If I configure sainlogic to use `W/m2` instead of `lx` for the solar radiation, the object value is always set to 0.
When set to `W/m2` the log tells `Target for solarradiatio…
-
Hi all, i configured the Ecowitt-Station to send the data to IP-Symcon.
this works fine.
Then i configured the Ecowitt Station to send Data to the IObroker.
this works also fine.
Then the da…
-
Please consider reducing the number of redundant warnings.
For an unknown reason my system sends from time to time invalid dewpointtemps. Ok, thats nothing the adapter can fix. And its ok to issue …
-
Hi,
I have a Sainlogic WS3500 Weather Station which communicate with its display at 868Mhz (inside the display there's a ESP8266 and a CC1101 receiver).
I'd like to receive date inside my own ESP826…