-
Hi @perexg ,
do you think, this device is also supported? I tried to boot from flash but without success.
Can you make an educated guess which port might be the serial console from this picture? Doe…
-
Hi,
Using the option to assign tuners to sources I discovered this, and I want to know your opinion.
Please think on this case:
- 2 tuners, each connected to only one antenna (pointing to differe…
-
#### Is your feature request related to a problem?
Here my use case:
- I want to drive the "pid filtering" of a SAT>IP server using the HTTP protocol. With the RTSP protocol it's easy to change th…
-
Hi @catalinii (et all),
Based on the issue #1174 I done this "simple" test:
- Chaining a minisatip instance with two remote tuners (minisatip as well) connected to the same wire.
- Run the "clien…
-
Hi,
The SAT>IP specification is good with the idea of sppliting the CONTROL plane with the TRANSPORT plane. For the first the RTSP protocol is used, and for the second the RTP.
However, as an _o…
-
This feature would enable installing tv sets anywhere in the house, with no cables except the power one.
-
Hi, I tried your application and I think it's great !
However, I found an issue with one camera: the app tries to connect for a very long time, but nothing happens and no error is shown (it seems t…
-
### Tvheadend Version
v4.3 (development)
### Build Number
4.3.r2368~g554004da
### Platform
Other..
### Architecture
ARMv8 (aarch64)
### Category
Transcoding
### Description
As described in …
-
I'm working on getting a SG2100 rotor to work on the Digibit box. Initial tests allow me to position to a certain satellite using the goto X command (diseqc cmd 0x6e).
Now the question is how to …
-
Hello there,
First off, thanks for this great piece of software, it really helps unlocking full potential of the SATIP server hardware. Hope you can help me with the following which I can't seem to…