-
When testing the download project bundle from the fancy camera (https://learn.adafruit.com/adafruit-memento-camera-board/fancy-camera ) page on the memento learn guide, the zip file does not include a…
-
Following this guide https://learn.adafruit.com/pm25-air-quality-sensor/python-and-circuitpython with minor adjustments I keep running into this error...
"Traceback (most recent call last):
File "…
-
### The problem
I have both sen55 and scd40 connected to same m5stack. I am able to apply temperature offset to scd40, see it reported in initialization logs (see below) and can see the offset appli…
-
Running the GNSS Tracker demo app produces the following output:
```
Running App
Run...
BMI270: X:0.0g, Y:0.0g, Z:1.0g
mono_coop_cond_wait Cannot transition thread 0x37 from STATE_BLO
C…
-
I reviewed the WIKI and searched considerably and I found no reference to retrieving the Heat Index from a DHT22 sensor. I am wondering if there is an away or can it be added?
I retrieve the heat …
-
Based on this Forum post: https://forum.sparkfun.com/viewtopic.php?p=245235#p245235
Investigate if it is possible to add alternate addresses for the ACS37800. Remembering that it will likely clash …
-
I'm trying to use this driver for my SCD40 sensor and I'm currently getting a "undefined reference to crc8". After the module installation, this is what I did.
cd %HOMEPATH%/199workspace/modules/s…
-
So, this device **was working fine for a month**.
But suddenly, today, it would only read 0 ppm, out of the blue.
I programmed the **exampleUsage** code, to check, and I get:
```
Serial: 0x53CAB…
stolk updated
5 months ago
-
Running the example code on the SCD41 devkit:
```
Serial: 0x53CABF073B9F
Waiting for first measurement... (5 sec)
Co2:498 Temperature:22.40 Humidity:26.96
Co2:600 Temperature:22.34 Humidity:27.22…
stolk updated
3 months ago
-
uint16_t isDataReady = false;
error = scd4x.getDataReadyStatus(isDataReady);