-
I've checked out the gnuradio-3.10 branch of this project like this:
```
git clone https://github.com/fventuri/gr-sdrplay3.git --single-branch --branch gnuradio-3.10 \gr-sdrplay3
```
Correct?
…
-
### Describe the bug
Soapy SDR can't find MSi.SDR even though sdrplayApi is active.
### Steps To Reproduce
Steps to reproduce the behavior:
1. Enable `services.sdrplayApi.enable`
2. Overlay `…
-
Olá Franco,
Here an other deadlock. Opened a new issue because it is not related to the first deadlock I opened days ago.
To understand how I get in this situations. I am building a server that wi…
-
Hi got everything running. But...
Did a few attempts today when ops-sat passed the Netherlands. No packets seen yet. I used the SDRplay RSP2pro sdr with the dual-band Arrow antenna (2m and 70cm).
I…
-
When running the application I get a segfault.
To make sure my command line parameters where not the reason, I also tried the example as shown on the git page.
All the following examples give a se…
-
I have sdrplay likely adapter. It fully detected by soapy:
```
% SoapySDRUtil --probe="driver=sdrplay"
######################################################
## Soapy SDR -- the SDR abstractio…
-
I would like to use QT GUI Range widgets to adjust the RSPduo gains dynamically.
May be t…
-
I am using gr-osmosdr with my SDRplay RSP1A and Gqrx Software. Things are going very well, with one exception:
When Gqrx is started and the device is running, I can change the frequency-correction as…
-
Hello,
**RSP1A cant be found under MAC OS after update from SoapySDRplay to SoapySDRplay3 (OS is Catalina 1.15.7).
If i revert back to SoapySDRplay and SDRplay (package install all via MAC PORTs)…
-
SDRPlay devices like RSPDx supports HDR mode (High Dynamic Range) in conjunction with 500kHz and 2MHz low-pass filters. Is this feature supported by SoapySDRPlay3 or not?
As the bands below 2MHz ar…