-
thanks for the plugin, I found useful.
what was not clear in instructions is that should have to be formatted the whole NMEA sentence, I supposed that giving the requested parameters to exchange th…
-
In previous kernels the GPIO chip definition was "gpiochip0" for Raspberry Pi 4 and "gpiochip4" for Raspberry Pi 5. Now both are "gpiochip0" in latest kernel. Seatalk1 in Signal K is broken for Raspbe…
-
Hi,
First of all thanks for sharing this code.
Second I would call this entry a question rather than an issue, but as i am new on github, i'm not sure what is the correct channel for questions. …
-
**Is your feature request related to a problem? Please describe.**
Currently there is a [PyPilot](https://github.com/pypilot/pypilot_pi) plugin that allows direct control of the pypilot open source A…
-
Hi to everybody and tanks a lot for this magnific library!!
I'm replaicing my iTC-5 device with an arduino DUE. With this opportunity I also want to export some data to my PC via serial interface. I …
-
In opencpn it is possible to connect to a signalK server.
If a signalK server is connected to a raymarine_gateway (nmea to Seatalk convverter), how can I send the raymarine_autopilot_pi data to that…
-
According to this [Raymarine alarm buzzer manual](https://defender.com/assets/pdf/raymarine/261899_manual.pdf), PGN 65288 seems to support more than what is defined as [Alarm ID enums in pgns.json](ht…
-
Situation:
RaspBerry with SignalK -- WiFi -- ShipModul -- ST1 to RayMarine ST7000+
Problem:
The buttons in the GUI do put the AP into 'Auto' and back to 'Standby' but the display only shows "No P…
-
**Describe the bug**
Some of our users can't login using this SDK, it shows `500, That's an error.` without more detail. They helped to try to login in Chrome app and it can login as normal.
**To …
Mioke updated
1 month ago
-
Hi
This will be a very useful program for many!
I tried to compile it with Arduino IDE on windows 10 for ESP32 devkit C.
i get some errors: see below.
I have used the ESPsoftserial library, is…