-
```
In addition to Serial port and RSMB, can you add the ability to connect to
a tcp host:port. This would help if the serial port is on a serial port
server, like ser2net. There's no protocol, you …
-
So I am in process of writing an app for Xbee-Pro S1 802.15.4, which probably has several differences between yours Xbee implementation and I need to be able to override the Initialize function from Z…
-
```
In addition to Serial port and RSMB, can you add the ability to connect to
a tcp host:port. This would help if the serial port is on a serial port
server, like ser2net. There's no protocol, you …
-
Hi,
Is it possible to add support for RS485 over ethernet?
I have a Moxa NPort 5130 Serial Device Server that I would like to use instead of a USB to RS485 converter.
This could possibly also e…
-
I have a Raspberry with an EnoceanPi and ser2net running. The config has the following entry:
`3001:raw:600:/dev/ttyAMA0:57600 8DATABITS NONE 1STOPBIT remctl`
At another Raspberry I have openHab…
-
I receive nothing from the tcp port,
device to tcp state: unconnected
is always unconnected.
with the same configuration /etc/ser2net.conf
6000:raw:600:/dev/ttyUSB0:115200 8DATABITS NONE 1STOPBIT -X…
-
It looks like it doesn't reconnect to zigate when it lost connection. Only getting the "ZIGATE : Connection Lost !" message and then nothing.
Happening with both zigate serial and wifi.
I'm usin…
-
My issue is to connect two computers by serial-cable. A webbrowser on system-a should communicate to a squid-proxy on system-b.
## try with ser2net
I successfully created a connection with the origin…
bornf updated
9 years ago
-
-
Trying to replace a RaspberryPi with ser2net with a NodeMCU module with this sketch to report P1 meter readings.
Connected the P1 Meter as described in the Readme. Compiled and flashed the sketch suc…