-
Serial Plotter added the ability to supply labels for the data as a comma/tab/space separated line of text. The ability to indicate that a text line should be ignored (not interpreted as labels) would…
-
Incredible work with this Serial Plotter tool. I was keeping Arduino just for it's serial plotter function but yours is much better and completely replaces that.
Is it possible to support higher b…
-
In function on_button_disconnect_click
https://github.com/raquenaengineering/luisabel_serial_plotter/blob/0554f0cfd68fa7c79bbb9b90335f571714e820f5/main_window.py#L559
you disable the toggles.
But …
-
Hi, I'm using the serial plotter, its good.
Could you please add the time unit (s/ms) at the end of x-axis?
Or use the unitive unit like "ms" no matter how large scale of time.
That will be a li…
-
I ran your i2c example, but I added Serial print statements for Arduino Serial Plotter labels, adding offsets so the traces don't overlap.
if (imu.Read()) {
Serial.print("Max:250,");…
-
Hi,
after fixing https://github.com/inkcut/inkcut/issues/208 i was hoping so see my plotter appear under parallel or serial driver menu (because i thought maybe our USB interface could appear under s…
-
Hi, I would like to report an issue with the Serial Monitor View in Sloeber IDE v4.4.3.202402080117. Currently, while receiving debug information from the serial port, the view seems to have limited s…
-
#define PROCESSING_VISUALIZER 1
#define SERIAL_PLOTTER 2
// Variables
int pulsePin = 0; // Pulse Sensor purple wire connected to analog pin 0
int blinkPin = 13; // pin to blink led at each beat
…
-
Verbose output during sketch upload:
`...`
`[==============================] 100% (1183/1183 pages)`
`done in 0.458 seconds`
`Verify 75712 bytes of flash with checksum.`
`checksumBuffer(start…
-
In the `PIDController::printGraph()` method the `setPoint` line in the graph is green when using `VERBOSE`, but red when using `NOVERBOSE`. I want the `output` line to change colour instead of the `se…