-
Thought to be closed by https://github.com/danzimmerman/dz_rpi_config/commit/13fe295029373262766fa7f58cfeabf76565c13d, but needs debugging.
Leaving it manual for now
-
Hello, iam martin. I working with lora, old display and ethernet IoT and i have a question to that lib.
The lora shield and the display working **both with spi** and i want to try to work with two …
-
**Is your enhancement proposal related to a problem? Please describe.**
The Infineon AIROC Wifi driver currently only supports the SDIO interface. This makes it unusable for boards where the SPI inte…
-
Hi there, we are interfacing the FT2232H with a slave device using pyftdi, using SPI for communication. We can write to the device, and it responds correctly on the logic analyzer. However, the ret…
-
### Checklist
- [X] Checked the issue tracker for similar issues to ensure this is not a duplicate
- [X] Read the documentation to confirm the issue is not addressed there and your configuration i…
-
## Environment
- Development Kit: esp8266ex
- IDF version: d6ec931e
- Development Env: Make
- Operating System: Linux
- Power Supply: external 3.3V
## Problem Description
There are severa…
-
### Board
M5Stack CoreS3
### Hardware Description
M5Stack CoreS3 with W5500 PoE Base
### IDE Name
VSCode with PlatFormIO 6.1.16b1
### Operating System
Linux
### Description
W5500 share the th…
-
GPIO的警告導致無法更新
這個就只能丟著不理了吧?...
`WARNING GPIO8 is a strapping PIN and should only be used for I/O with care.
Attaching external pullup/down resistors to strapping pins can cause unexpected failures…
-
-
I understand from the link below that the TMC2130 in SPI mode can be run purely over the SPI bus with no need for any connections to the step and direction pins. Can I do this using this library?
…