-
Is it possible to use the stm32l0 (Murata-module) with sx1262 also in Visual-studio-code ?
If yess, is there a how-to ?
-
I have been testing the SCD30 sensor(https://www.sensirion.com/en/environmental-sensors/carbon-dioxide-sensors-co2/) with https://github.com/sparkfun/SparkFun_SCD30_Arduino_Library library and the sen…
-
I want to be able to wake from deepsleep using the RTC alarm. I've tried the following, but still dead asleep. I can get the alarm event to occur, but as soon as I put it in deep sleep, it never occ…
-
Hi there,
I'm currently using OpenOCD on a Raspberry Pi to program an STM32L0. I've written a basic Python wrapper around OpenOCD as a quick fix. I'm wondering if there are any examples or documen…
-
I sat and looked at this message for a long time, and upgraded my Arduino version, before determing what specific user error I was making- I had the wrong programmer selected. Based on the issues and …
-
I'm trying to get working a GNSS passthru code to be able to connect UBLOX U-Center to Gnat board to play with GPS.
Unfortunately, I never get it to work, so I tried something very simple without a…
-
When compiling https://github.com/kriswiner/CMWX1ZZABZ/blob/master/CricketAssetTracker/Blink_Cricket.ino in Arduino.
```
/home/jpmeijers/Arduino/Cricket_Blink/Cricket_Blink.ino: In function 'void …
-
For MJS2020, I now implemented basic powersaving based on the STM32 "Stop" mode, resulting in about 3.6mA while sleeping. This mode stops all core clocks and some peripherals, puts the internal regula…
-
Hi,
I am using a custom board with nothing but LoRa murata IC and two relays. I made a small program to test the stop and sleep function.
I cannot see the controller going in the sleep/stop mode. …
-
I am trying to use the MCCI boards but cannot find a board similar enough among the ones available. Specifically, in the current platformio library there are no STM32L0 boards with Arduino framework s…