-
Hi,
the getStatus method isn't working due to wrong shift operation.
```
void sx126x_getStats(uint16_t* nbPktReceived, uint16_t* nbPktCrcError, uint16_t* nbPktHeaderErr)
{
uint8_t buf[7];…
-
-
When doing real-world testing of the FEC, it often appears that it only improves correct reception by 2-4dB. Ultimately, it appears that FEC causes packets to either be received or not received at all…
faydr updated
3 years ago
-
Hello!
Thanks for the effort to start Lora on Esphome!
I try to get the code running, but it does not really work. I have Heltec Wireless Stick Lite V3, so the pins should be okay. Also I have a…
-
HI @CongducPham
I am trying to compile lora_gateway manually for RPI0W2 Board since the existing gateway image wont work for RPI0W and the Raspberry Pi team already released RPI0W2 which is running …
-
HI,
Could you please highlight for me how I could use this driver on my FRDM KL03z board?
I will really really really appreciate it
Thank you so so much
-
### Category
Other
### Hardware
Other
### Firmware Version
v2.5.0.ab7de7f and 2.4.x
### Description
**Device under test**
Heltect HT-CT62 but other ESP32 device seem to be aff…
dm5tt updated
2 weeks ago
-
I cannot join our devices with SX1262 chips to the Helium network. The same devices joins without issues to TTN and ChirpStack. Also the same devices configured for EU868 region joins without issues t…
-
I can use LLCC68 module to send data normally, but if I combine the receiving and sending code together, after the sending code is executed, the serial port will print the received garbled data
![企…
-
Hi, I am using LoRa SX1262 Raspberry Hat with Raspberry Pi. This is the issue I am getting when using the Network Examples reciever.py code
Begin LoRa radio
Traceback (most recent call last):
F…