-
I have configured miner (using docker image) and semtech pkt fwd sx1302. What to do after this? How to add this diy gateway in helium block chain. Please provide some information.
-
May I ask why I can use SPI to read and write to the Sx1302 chip, but I cannot read and write to the Sx1250 chip? The module I am using is the sx1302S module on the market, which contains two sx1250 R…
-
We need to be able to interface with the LoRaWan Antennas on the RPis. Due to the complexity of this protocol, finding an ease-of-use library is probably going to be the deciding factor for the langua…
-
Hello,
According to the code here:
https://github.com/helium/sx1302_hal/blob/75b911a6aa0957ab3f3258e083772af7155f27f4/packet_forwarder/src/lora_pkt_fwd.c#L2893
...and the config file:
http…
-
Hello,
I've been testing basicstation and trying to get it up and running and it seems to work reasonably well when I've got a wlan connection. However, when I try to connect over a cellular-based …
-
I encountered an issue with an older RAK v1.5 where the concentrator reset pin was 17 instead of 25, which is the default specified in the variant file for COMP-RAKHM. This was causing an endless loop…
-
src/loragw_hal.c:260:14: warning: taking the absolute value of unsigned type ‘uint32_t’ {aka ‘unsigned int’} has no effect [-Wabsolute-value]
https://github.com/Lora-net/sx1302_hal/blob/4b42025d175…
-
Hallo!
It is a gear help this HAL for starting with SX1302.
But for rapid starting it will be better for update the LoRa Core Reference Design.
A great help will be, if some more information about …
-
I'm trying to build Basics Station on a Raspberry Pi 4 Model B running Raspberry Pi OS Lite 64-bit. I tried following the compilation instructions, but ran into errors on Step 2. I'm not sure if it ma…
-
We have beaglebone black (with LoRa shields) and intel gallileo boards currently unused, we should consider supporting them in walt.